INSTALLATION

Directions and Tips

E-mail us your name and address (or call toll-free 1-800-843-3702) for FREE product samples and information, a Fence Planning Guide and the SAFE-FENCE System Reference Manual.

Building Installation

Location of the Fence Charger

Send us (or call with) a detailed description of your fence needs. Our experienced sales staff will provide a cost estimate at no obligation or up-front expense. Discover the affordability of SAFE-FENCE!
Locate the fence charger close to or at the fence where 110 volt power is accessible. Placing the charger under cover is recommended as under the eave or inside of a building. If your power source is greater than 50 feet from the fence it is advisable to run underground 110 volt wire from the source to the fence and stub up a weather proof plug-in rather than run a long distance of high voltage burial wire. A certified electrician should be used for the installation of 110 volt wiring. When fencers are located on a corner or gate post, a small, rectangular, plastic waste can is an easy way to protect the fencer from direct rain. Cut a section out of one side of the waste can to clear the mounting screws and slide it upside down over the fencer. Solar fence chargers do not require cover and should be placed in direct sun facing south.
Corner Post Installation

Be safe! Have all electrical wiring installed according to code by a licensed electrician.

Electric Fence Questions? E-mail the SAFE-FENCE Hotline!
J.L. Williams Company . PO Box 209 . Meridian, ID 83680
1-800-843-3702
Copyright© 2000 J.L. Williams Company
Web Site by:
E-mail us or Call 1-800-843-3702 E-mail us your name and phone number or Call 1-800-843-3702